4.0 MECHNICAL INSTRUCTIONS
Fig.1
1. Side view as Fig.1
Remove base cover adorn discreteness as Fig.1.
2. Remove screws of the base cover as Fig.2.
6. Broken connection of DVD driver to remove
DVD driver , then soldered short pattern for
laser diode as Fig.6.
3.
Fig.2
Remove screws of the base cover as Fig.3
Fig.3
Fig.4
4. Open the door and remove screws to remove
door & middle cabinet discreteness as Fig.4.
5. Rotate the top and remove screws to break
the top and the base away as Fig.5.
Fig.5
7.
Fig.6
Remove screws to remove lithium battery as
Fig.7.
8. Remove screws to remove mian board and
powerkey board as Fig.8.
Fig.7
Fig.8
soldered
