5. TROUBLESHOOTING & SERVICE TIPS
5.1 Procedure to change region code
1. Open
DVD
Door
2. Press and hold the OSD key together with the POWER ON (
f
II) key for about 4sec
to enter CONFINGURATION SETUP menu
3. Press the UP and DOWN (
S
▼
) key to enter REGION on menu
4. Press the NEXT (
ff
|) key to select REGION NO.
5. Press the UP and DOWN (
S
▼
) key to select number of 1 to 6
6.
Press the OK key to save the selection.
Note : Once press OK, data with new REGION NO. will be stored into EEPROM and
replace the old one.
7. Switch off and re-switch on the product
8. Verify Region code change done
Region Code
Region
1 USA
2 EUROPE
3 ASIA
PACIFIC
4
AUSTRALIA, NEW ZEALAND, LATAM
5 RUSSIA,
INDIA
6 CHINA
REGION
AGING SETTING
Version : 1.00
DEFAULT
Summary of Contents for PET320
