4.0 MECHANICAL INSTRUCTION
Disassembly Procedure
1
Remove 7pcs of screws on the bottom
cabinet and remove 1pc of screw in middle
cabinet (we can find it after open CD door)
2
Open the bottom cabinet carefully and
unplug the wire connector of key board
from the main board. (left bottom side)
3
U
nplug all the wire connector from
main board. (The wire connectors are
for: DVD loader, battery board and TFT
driver board, and speaker.)
Remove all the screws on the main
board and then take the main board
from bottom cabinet.
4
Remove the flex cable on the bottom side.
