4.0 MECHANICAL INSTRUCTION
5
Remove all the screws on the battery
board and then take out the battery
with battery board.
6
Remove 11pcs screws from key board.
7
Remove 6pcs of screws on the display
frame. Carefully open the display frame
with the catches by screwdriver.
(There are six catches as shown in the
picture)
8
To remove the TFT, de-soldering the wire
connected between TFT and TFT board
first. (Please note the wire location as
shown in picture during re-assembly)
And unplug wire connector from TFT
board and TFT driver.
Take out the TFT board from cabinet using
eradicator.