4.0 MECHANICAL INSTRUCTION
Disassembly Procedure
1. Remove 7pcs of screws on the side of bottom cabinet.
2. Open the bottom cabinet, up-plug all the wire connecter
from main board (The wire connecter are for : DVD
loder, battery board and TFT driver board, Key board
and speaker) Remove all the screws on the main board,
then take the main board from bottom cabinet.
3. up-plug the FFC from DVD driver, then you can take out
the DVD Driver.
4. Remove the flex cable on the bottom side.
5. Remove 2 pcs of screws on the battery board. Then take
out the battery together with the battery board.
6. Remove 4pcs of screws on the display frame. Carefully
open the display frame with the catches by screwdriver.
(There are six catches as shown in the pictures) Refer to
next picture.
Summary of Contents for PET716
Page 7: ...3 0 INSTRUCTION FOR USE ...
Page 15: ...5 0 TROUBLESHOOTING SYMPTOM NO SOUND FROM HEADPHONE ...
Page 18: ...6 0 BLOCK DIAGRAM ...