4.0 MECHANICAL INSTRUCTION
Disassembly Procedure
1. Remove 5pcs of screws on the side of
bottom cabinet (including the one behind
plastic stand).
2. And don’t forget remove the screws when
you slip the DVD cabinet
slip the TFT section, then you can open the
bottom cabinet. Be-careful the FFC which
connect with main board and TFT board.
3. Open the bottom cabinet, up-plug all the
wire connecter from main board (including the
FFC connect with TFT board and main board),
The wire connector for: DVD loader, battery
board.
Remove all the screws on the main board (3
pcs) then take the main board from bottom
cabinet.
Summary of Contents for PET723
