1.0 TECHNICAL SPECIFICATION
To check the software version and change
region code of your DVD Portable
1. Power ON the DVD player and open the DVD
door
2. Press the “SETUP” button on remote control,
then select the “Preference MENU”
3. Press the remote button in the sequence as
9 -> 6 -> 5 -> 3
4.
The LCD display showed the existing region
code. Press
(navigation up) or
(navigation down) repeatedly to select the
number from 0 to 6.
5.
Refer below table for your region code setting
Select “0” setting = Region Free (confidential)
Procedure on how to upgrade the software of
the DVD Portable
For the best performance of your DVD Portable.
Check www.philips.com/support for latest
software upgrades available.
A) By CD-ROM
1. Download the “PHILIPS.BIN” file from the Philips
support site
2. Unzip the file and then burn it into a CD-ROM to
make a disc for upgrade
3. CD-ROM disc name must be “PHILIPS”
(otherwise it will not be recognized as a disc for
upgrade)
4. Power on the Portable DVD Player with AC/DC
adaptor
5. Play CD-ROM for firmware upgrade
Warning: Do not unplug the AC adaptor during
firmware upgrade to prevent flash corrupt of the
set!!
6. Once upgrade is completed, the player will restart
automatically and observed PHILIPS LOGO on the
screen.
7. Open the DVD door to remove the disc
Summary of Contents for PET723
