background image

12

English

GENERAL EXPLANATION

About this manual

This manual gives the basic instructions for operating this DVD player. 
Some DVD discs however are produced in a way that requires specific oper-
ation or allows only limited operation during playback. In these cases the
player may not respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay.  When a “

” appears on

the screen, the operation is not permitted by the player or the disc.

Remote control operation

• Unless otherwise stated, all operations can be carried out with the

remote control. Always point the remote control directly at the player,
making sure there are no obstructions in the path of the infrared beam.

• When there are corresponding keys on the main unit, they can also be used.

Menu navigation

• Your player has an intuitive menu navigation system to guide you through

various settings and operations.

• Use the function keys to activate / disable relevant operations.
• Use

3

,

4

,

5

,

6

to browse through menus.

• Press 

ENTER

key to confirm your selection.

BASIC FUNCTIONS

Switching on for OSD language setup

English is the default language of your player’s on screen display. You may choose to
use English, French, or German for your player’s on screen display.

Region

OSD Language Options

Asia Pacific 

English, French, German

1

Slide the 

POWER

switch to 

ON

to switch on the

player.

2

Press 

SETUP

for the setup menu.

3

Select 

General Setup Page

and press 

ENTER

.

4

Scroll and select 

OSD Language

and press 

2

to

select from OSD language options.

5

Select your preferred language and press 

ENTER

.

Loading discs and switching on

1

Gently push the front panel as shown to open    
the disc compartment

.

2

Insert your chosen disc, label side up (also when
a double sided DVD disc is inserted). Make sure
it is sitting properly in the correct recess.

3

Gently pull the front panel back to close the disc
compartment.

4

Slide the 

POWER

switch to 

ON

to switch on the player.

TIP

A normal mechanical noise is heard during playback.

P1-19_PET726_37_Eng  2008.6.24  10:52  Page 12

Summary of Contents for PET726




















Reviews: