4.0 MECHANICAL INSTRUCTION
Disassembly Procedure
1. Remove 9pcs of screws on the side of bottom
cabinet.
And don’t forget the one behind bottom cabinet feet.
2. Open the bottom cabinet carefully. Firstly, unplug
the wire connector of key board from the main
board. (left bottom side);
Then unplug the wire connector which connect the
audio board and TFT board adhere by the flannel.
3. Unplug all the wire connecter from main board.
The wire connecters are for DVD loader, battery
board and TFT driver board, and speaker.
Unplug the FFC from DVD driver, and then you can
take out the DVD loader.
Summary of Contents for PET816/05
