4.0 MECHANICAL INSTRUCTION
8. To remove the TFT, de-soldering the wire
connected between TFT and TFT board first. (Please
note the wire location as shown in picture during re-
assembly)
And unplug wire connecter from TFT board and audio
board.
Take out the TFT board from cabinet using eradicator.
Don’t forget unplug the FFC of panel from the TFT
board, it is behind the black flannel.
After this, take the panel from the front cabinet
carefully. There are three two side tape rubbers as
shown in the pictures
9. To remove the hinge, remove the screws on the
hinge.
Summary of Contents for PET816/05
