EN 36
[Format and edges]
: Access advanced
settings to control the display format of
the picture.
-
[Picture format]
: Change the picture
format.
-
[Screen edges]
: Change the picture
size.
-
[Picture shift]
: If available, move the
position of the picture.
More sound settings
You can change the settings in the Sound
menu.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Sound]
,
then press
OK
.
3. Select a setting to change, then press
OK
.
[Sound style]
: Access predefined sound
settings.
[Restore style]
: Restore the last
selected predefined sound setting.
[Bass]
: Adjust the bass level of the
speaker and headphones.
[Treble]
: Adjust the treble level of the
speaker and headphones.
[Surround mode]
: Select a surround
sound mode to enhance your audio
experience.
[Auto incredible surround 3D]
: Select
a surround sound mode to enhance
your audio experience in 3D mode. For
certain models.
[Headphone volume]
: Adjust
headphone volume.
[Advanced]
: Access advanced settings
to enhance your audio experience.
-
[Auto volume levelling]
:Enable the
reduction of sudden volume changes,
for example, when switching channels.
-
[TV speakers]
: Select the preferred
speakers to stream audio from the TV.
See
Connect your TV > Set up
EasyLink devices > Select speaker
output
(Page 57).
-
[Clear Sound]
: Enhance sound quality.
-
[Audio Out format]
: Select the type
of audio output through the digital
audio output connector. Choose
between
[Multichannel]
and
[Stereo]
.
-
[Audio Out levelling]
: Set the output
level for stereo audio. Select
[Less]
for
a certain amount of loss in intensity or
signal strength. Select
[More]
for no
loss in intensity or signal strength.
-
[HDMI 1 - ARC]
: Enable audio output
from the ARC-compliant device
connected to the HDMI 1 connector.
-
[Audio out delay]
: Automatically sync
the image on the TV to the audio from
a connected home theatre. You do not
need to use this setting when
connecting the TV to a Philips home
theatre.
-
[Audio out offset]
: Adjust the setting
for audio output delay. Available if
[Audio out delay]
is switched on.
Audio format
Digital channels
If a digital TV channel broadcaster streams
audio in multiple formats, you can select an
audio format.
1. Press .
2. Select
[Setup]
>
[Channel settings]
or
[Satellite settings]
>
[Languages]
>
[Preferred audio format]
.
3. Select an option, then press
OK
.
[Standard]
: Receive standard audio
format (MPEG).
[Advanced]
: Receive advanced audio
formats, if available (AAC, Dolby Digital
or Dolby Digital Plus).
Analogue channels
If an analogue TV channel broadcaster
streams stereo audio in multiple formats, you
can select an audio format.
1. Press .
2. Select
[Setup]
>
[Channel settings]
or
[Satellite settings]
>
[Mono/Stereo]
.
3. Select a setting, then press
OK
.
