background image

Appendix 19

Packaging:

 The presence of the logo (green 

dot) means that a contribution is paid to an 
approved national organisation to improve 
package recovery and recycling infrastructures. 
Please respect the sorting rules set up locally 
for this kind of waste.

Batteries:

 If your product contains batteries, 

they must be disposed of at an appropriate 
collection point.

Product:

 The crossed-out waste bin symbol on 

the product means that the product belongs 
to the family of electrical and electronic 
equipment. In this respect, the European 
regulations ask you to dispose of it selectively:

• 

At sales points in the event of the 
purchase of similar equipment.

• 

At the collection points made available 
to you locally (drop-off centre, selective 
collection, etc.).

In this way you can participate in the reuse 
and upgrading of Electrical and Electronic 
Equipment Waste, which can have an effect on 
the environment and human health.
The paper and cardboard packaging used can 
be disposed of as recyclable paper. Have the 
plastic wrapping recycled or dispose of it in 
the non-recyclable waste, depending on the 
requirements in your country.

Trademarks:

 The mentioned references in 

this manual are trademarks of the respective 
companies. The lack of the trademarks ® 
and ™ does not justify the assumption that 
these dedicated terminologies are free 
trademarks. Othe rproduct names used herein 
are for identification purposes only and may 
be trademarks of thei r respective owners. 
Screeneo Innovation SA disclaims any and all 
rights in those marks.
Neither Screeneo Innovation SA nor its affiliates 
shall be liable to the purchaser of this product 
or third parties for damages, losses, costs, or 
expense s incurred by the purchaser or third 
parties as a result of accident, misuse, or abuse 
of this product or unauthorised modifications, 
repairs, or alterations to this product, or failure 
to strictly comply with Screeneo Innovation SA 

operating and maintenance instructions.
Screeneo Innovation SA shall not be liable for 
any damages or problems arising from the use 
of any option s or any consumable materials 
other than those designated as original 
Screeneo Innovation SA/PHILIPS products or 
Screeneo Innovation SA/PHILIPS approve d 
products.
Screeneo Innovation SA shall not be held liable 
for any damage resulting from electromagnetic 
interference that occurs from the use of any 
interface cables other than those designated as 
Screeneo Innovation SA/PHILIPS products.
All rights reserved. No part of this publication 
may be reproduced, stored in a retrieval 
system or transmitted in any form or by any 
means, electronic, mechanical, photocopying, 
recording, or otherwise, without the prior 
written permission of Screeneo Innovation SA. 
The information contained herein is designed 
only for use with this product. Screeneo 
Innovation SA. is not responsible for any use of 
this information as applied to other devices.
This user manual is a document that does not 
represent a contract.
Errors, printing errors and changes are reserved.
Copyright © 2019 Screeneo Innovation SA.

Summary of Contents for PicoPix Micro PPX320





















Reviews: