Philips PL7119C Menu Manual Download

Page: 3 / 8

LANGUAGE - Highlight LANGUAGE, then press the

button to

select ENGLISH, ESPANOL, or FRANÇAIS. The Menu and some on-
screen displays will now appear in English, Spanish, or French. The lan-
guage of the Labels and the Channel Guide will not change.

CHANNEL INSTALL - Highlight to display the CHANNEL INSTAL-
LATION MENU. This menu contains the following adjustable items: Auto
Program, Channel, Channel Program, Input, Label, Video Blank, Audio
Blank and Exit. Refer to CHANNEL INSTALLATION Sub-Menu descrip-
tions.

CABLE TUNING - Highlight CABLE TUNING, then press the

button to select ON or OFF. When ON is selected the TV will be set to
receive Cable TV signals. When OFF is selected the TV is set to receive
normal Antenna TV signals.

BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT -
(Picture Controls) - Highlight the Picture Control you want to adjust, then
press the

button to adjust the picture control to the desired level.

NOISE REDUCTION - Highlight NOISE REDUCTION and press the

button to turn the control ON or OFF. Noise Reduction will help to elimi-
nate signal noise (speckle, snow, etc.) from the TV’s picture.

AVL - Highlight AVL, then press the

button to turn the control ON or

OFF. When ON, AVL will level out the sound being heard, for more consis-
tent listening by reducing the peaks and valleys that occur during program
changes or commercial breaks.

VOLUME BAR - Highlight VOLUME BAR, then press the

button to

select ON. When you press the VOL(ume)

▲

▼

buttons, a bar appears

on the screen, showing the change in sound. (DISPLAYS must be set to
ALL.) Or, press the

button to select OFF. The bar will not appear when

you adjust the volume.

MIN VOLUME (Minimum Volume) - Highlight MIN VOLUME, then
press the

button to set the minimum allowable volume.

MAX VOLUME (Maximum Volume) - Highlight MAX VOLUME, then
press the

button to set the maximum allowable volume.

SWITCH ON VOLUME - Highlight SWITCH ON VOLUME, then press
the

button to select a volume level. The volume will be at this

level every time you turn on the TV. If STANDARD is selected, the last
volume level setting will be used.

SWITCH ON CHANNEL - Use this feature to have the TV tune to the
same channel every time you turn on the TV. Highlight SWITCH ON
CHANNEL, then press the

button to select any channel, 1 - 125.

(Or, use the Number buttons to select a channel between 1 and 99. Enter a
zero before single-digit numbers.) Every time you turn on the TV, the TV
will tune to the channel you selected. Or, press the

button to select

STANDARD. When in STANDARD the TV will tune to the channel it was
on when it turned off.

POWER ON - Highlight POWER ON, then press the

button to select

FORCED. This disables the POWER button on the front of the TV. The TV
is now activated when the AC power cord is plugged into an outlet. The
SLEEP TIMER feature is disabled on both the remote control and the TV’s
front panel. With a consumer remote, the TV will not turn off or on. Or,
press the

button to select STANDARD. The TV will return to normal

operation. (Make sure KEYBOARD is set to ON.)

CHANNEL DISPLAY - Highlight CHANNEL DISPLAY, then press the

button to select NONE. This disables any on-screen displays, except

SLEEP TIMER and MUTE. Or, press the

button to select ALL. All on-

screen displays (such as the Channel Number, Channel Label, or Channel
Guide) will reappear. Press the

button again to select NUMBER or

LABEL. With NUMBER selected, only the channel number will be dis-
played. With LABEL selected the display will appear as set in the LABEL
control under the CHANNEL INSTALLATION menu.

KEYBOARD LOCK - Highlight KEYBOARD LOCK, then press the

button to select ON or OFF. ON disables all the buttons on the front panel
of the TV. OFF re-enables the buttons on the front panel of the TV.

ESP - This feature allows you to select a time when the TV will automati-
cally turn off. The TV must remain on continuously during the amount of
time you select. If the power is switched off, the ESP timer will be reinitial-
ized. Highlight ESP, then press the

button to select the number of

hours (1 - 99) before the TV turns off. (You also may use the Number but-
tons to enter the number of hours. For example, press 0, then 6, for six
hours. Enter a zero before single-digit numbers.) Or, press the

button to

select OFF (or press 0, 0). The TV will not shut off automatically.

AUDIO/VIDEO MUTE - Highlight AUDIO/VIDEO MUTE, then press
the

buttons to select OFF, BLACK, or BLUE. If BLACK or

BLUE is selected, the screen will be solid black or blue when the TV is on
a channel that is not receiving a signal. The sound will be muted on that
channel. Press the

button to select OFF. The normal background static

will appear when the TV is on a channel that is not receiving a signal.

WELCOME MESSAGE - Highlight WELCOME MESSAGE, then press
the

button to display the Welcome Message Sub-Menu. Within this

Sub-Menu the WELCOME MESSAGE can be turned ON or OFF. Two
lines (LINE 1 and LINE 2) on information can be set to be displayed on the
screen when the TV is powered ON. Use the cursor

▲ ▼

buttons to scroll

characters for the message lines. Clear will eliminate any message written.

CHANNEL GUIDE - Highlight CHANNEL GUIDE, then press the

button to select OFF, ON, or POWER ON. If you select POWER ON,

the Channel Guide (a list of channels that are labeled) will appear when you
turn on the TV. The Channel Guide will appear also when you press the CH
GDE (Channel Guide) button. If you select ON, the Channel Guide will
appear only when you press the CH GDE button. (Also, if you select
POWER ON or ON, make sure CHANNEL DISPLAY is set to ALL.) If
you select OFF, the Channel Guide will not appear when you press the CH
GDE button. Remember, only the programmed channels that are labeled
(within the CHANNEL INSTALLATION MENU) will appear in the
Channel Guide.

REMINDER - Highlight REMINDER, then press the

button to select

ON. The current channel number (and Label, if assigned) will appear on-
screen at all times. (Make sure CHANNEL DISPLAY is set to ALL and
Closed Captioning is set to OFF.) Or, press the

button to select OFF. The

channel number will appear briefly when the channel is selected, then dis-
appear.

3 DIGIT ENTRY- Highlight 3 DIGIT ENTRY, then press the

button to select ON or OFF. With ON selected the 3 digits can be entered to
select channels above 99.

A/CH-A/V SWITCH - When highlighted, press the

button to

select ON or OFF. When ON is selected, pressing the A/CH button will
toggle between the currently viewed channel and the last viewed channel.

CC- Highlight CC, then press the

button to select the Closed Caption

Mode. The choices are OFF, CC-1, CC-2, or CC on MUTE. CC-1 is the
most common choice for broadcasters. The CC on MUTE will display the
Closed Captioning material when ever the Mute button is pressed.

SAVE CC (Save Closed Captioning) - Highlight SAVE CC, then press the

button to select YES. The Closed Captioning mode you selected will be

saved, even if you turn off the TV power. Or, press the

button to select

NO. Closed Captioning will be turned OFF when you turn off the TV
power.

V-CHIP MENU ITEM (Censoring Control) - Highlight V-CHIP MENU
ITEM, then press the

button to select ON or OFF. When ON, the V-

CHIP menu options for the user controls will be shown. When OFF is
selected, the user controls will not display the V-CHIP blocking options.

SAVE V-CHIP (Censoring Control) - Highlight SAVE V-CHIP, then press
the

button to select ON or OFF. ON will save the current V-CHIP set-

tings within the TV’s memory.

V-CHIP SETUP (Censoring Control) - Highlight V-CHIP SETUP, then
press the

button to display the V-CHIP SETUP Sub-Menu. Within this

Sub-Menu, certain types of programming maybe set to VIEW or BLOCK.
See the V-CHIP SETUP Sub-Menu Descriptions for more details.

SLEEPTIMER - Highlight the SLEEPTIMER, then press the

button to scroll and select a preset time for the TV to turn itself off. The
options are OFF, 15, 30, 45, 60, 90, 120, 180 or 240 minutes.

SECURITY - Highlight SECURITY, then press the

button to

select STANDARD or HIGH. With STANDARD selected, an IR sequence
(31, 97, 53, MUTE) will access the SETUP MENU. If HIGH is selected,
access to SETUP is only allowed with a Setup Remote.

EXIT - Highlight EXIT, then press the

button to remove the on-screen

menu from the TV’s screen.

ESCRIPTION OF

AIN

-S

CREEN

ENU

ONTROLS