PARTS LIST + DISASSEMBLY ADVICE STAND
OPEN THE STAND
pressure fi xation rubber through
the tray
E
E
E
remove SCREW E (3 x)
remove LOCKED INSERT 39
NOTE:
OPEN NOW THE STAND.
DON’T WORRY IF THE SNAPS AT THE SIDE WILL BE
BROKEN.
THEY ARE ONLY FOR THE ASSEMBLY.
THE STAND REMAINS CLOSE WITHOUT THESE SNAPS.
ADJUSTMENT AND CONTROLS
– To avoid leakage of the sealings and damage to
the components in and on the boiler, NEVER clean
the boiler with vinegar, a descaling agent or other
chemicals.
– The boiler doesn’t contain serviceable parts.
Never disassemble the boiler body and /or compo-
nents on and in the boiler.
– ALWAYS REPLACE THE BOILER ( 28 ) WHEN:
*
the mechanical safety valve ( 24 ) has been acti-
vated.
*
the boiler thermostat or hand - resettable safety
thermostat are open, because the boiler has
been subjected to too high temperatures.
*
the electrovalve ( 33 ) fails or the sieve is soiled
with scale.
– After the product has been repaired, it should func-
tion properly and has to meet the safety require-
ments as laid down and offi cially established at this
moment.
Pos
Service Nummer
Tray rubber foot for fi xation
Complete tray
Safety cap for boiler
Filling hole gasket for alu boiler
Superior stand printed
32
33
34
35
36
9965 000 08193
9965 000 08194
9965 000 08244
9965 000 01782
9965 000 08245
37
38
39
40
41
42
43
44
45
46
Description
4822 462 71999
9965 000 08243
9965 000 08201
9965 000 08202
9965 000 01790
Boiler rubber feet
Complete boiler
Locket insert
Inferior stand
Filter
9965 000 08203
4822 218 11561
9965 000 01901
9965 000 01902
9965 000 07437
Main switch
Electrovalve
Steam ready light
Boiler empty light
Intermediate cable
47
9965 000 08246
Funnel
