6
e
3D Max Glasses -
Rechargeable active 3D glasses
With these 3D Max glasses you can watch full HD 3D on your
Philips 3D TV.
What’s in the box
- 3D Max active glasses
- Micro USB charger cable
- Microfiber pouch
- Manual and warranty
1
-
O
on/off switch,
2
- LED indicator,
3
- Player 1 or player 2 selection,
4
- Battery charger connection (Micro USB connection),
5
- Receiver lens
See illustration A, B
! - Remove both protective foils that cover the glasses.
Watch 3D
Switch on your Philips TV and start a 3D program.
Press
O
to switch on the 3D Max glasses and put them on.
The glasses need some seconds to adjust to the 3D signal from
the 3D transmitter on the TV. At first use, this may take up to
15 seconds. Make sure the receiver lens in the centre of the
glasses can receive the 3D signals.
See illustration B.
When the 3D glasses do not receive 3D signals for 2 minutes,
the glasses switch off automatically.
Battery level
You can check the battery level when you switch on the 3D glasses.
During the first 5 seconds the LED indicator blinks . . .
- Red - if there is less than 1 hour of 3D viewing remaining
- Orange - 1 to 3 hours remaining
- Green - more than 3 hours remaining.
Charging the 3D glasses
See illustration C.
To charge the glasses, plug in the micro USB plug and connect the
standard USB plug to the TV, PC or USB hub. The TV or PC must
be switched on to charge.
When charging, the LED indicator is on and is . . .
- Red - charging
- Green - fully charged.
Charging the empty battery may take up to 3 hours.
A fully charged battery allows 30 hours of 3D watching.
Two-player gaming*
You can use these glasses to play two-player games.
Two players can watch the same TV but see two different screens
to play a game. To switch the glasses to watch the Player 1 screen
or Player 2 screen, press the Player 1 or 2 selection key.
* Read the Help on your TV,
h
> Help > More TV > Games,
to check on the availability of Two-player gaming on your TV.
330657_v2.indd 6
11/07/2011 12:22
