22
The odometer will remain displayed for only a few seconds then the
console will go to the start up display, also known as Idle Mode. The
message window will be scrolling the start up message. You may now
begin to use the 7.0 T.
The console will automatically power down after 30 minutes of
inactivity. Press any key to wake the console up again. To disable this
function so console always remains powered on see Maintenance
section on page 58. Always turn off the main power switch when the
7.0 T is not in use.
Console operation
Set up
The set up key function will allow you to enter patient data and
customize the settings of the 7.0 T. When the set up key is pressed
the first option in the menu appears. Use the up/down arrows to
scroll through the menu and press the enter key to select an option.
Set up menu
• Patient data
- Age : used in VO2 and heart rate programs.
- Gender : used in VO2 program.
- Weight : used in METS and calorie calculations and VO2 program.
- Height : used in the Symmetry program.
Quick start
This is the quickest way to start an exercise session. After the console
powers up you just press the Start key to begin; this will initiate the
Quick Start mode. In Quick Start the speed will be set to zero until
the user adjusts the speed. Time will count up from zero, all workout
data will start to accrue and the speed and incline may be adjusted
manually by pressing the Up or Down key. The dot matrix will display
a speed level. As you increase the speed more rows will light
indicating a harder workout.
