Philips RT30A, Instructions For Use Manual

The RECORD MODE SET UP menu will appear.

ALARM REC MODE

- This defines the alarm recording mode

option.  When an alarm occurs, the VCR will record the alarm at
the selected tape speed 6H, 18H or 30H, and then revert back to
the real-time recording speed.

3. Press the 

↓

button to choose the ALARM REC MODE

option.

4. Press the 

→

button to select alarm recording hours.

ALARM REC TIME

- This defines the amount of time that the

alarm is recorded, 30 sec., 1 min., 3 min., 5 min., 10 min. or
T.END.

5. Press the 

↓

button to choose the ALARM REC TIME option.

6. Press the 

→

button to select the desired time of recording, 30

sec., 1 min., 3 min., 5 min., 10 min. or T.END (Tape end).

If you choose the T.END, alarm recording is continued
until tape end is reached.

While the alarm is in process, the buzzer will ring. If you
want to stop buzzer, press CLEAR button.

The ALARM indicator in VCR indicator panel will appear
when the alarm recording is proceeding.

1SHOT REC

- This defines the interval time that one picture is

recorded, 1 sec., 3 sec., 5 sec., 15 sec., 30 sec., 60 sec. or OFF.

Notes:

If you select the '000H' option in normal recording, the
VCR will activate the '1SHOT REC' mode function. This
will record a single shot picture after each defined time
interval which is programmed in the '1SHOT REC'
menu.

If you select '1SHOT REC' OFF, the unit will record one
picture each time the external 1SHOT REC input is
activated.

7. Press the 

↓

button to choose the 1SHOT REC option.

8. Press the 

→

button to select the desired time of recording, 

1 sec., 3 sec., 5 sec., 15 sec., 30 sec., 60 sec. or OFF.

VEXT

: In case of connecting the extemal equipment (switcher or

multiplexer), you can set the switching time of the camera.

9. Press the 

↓

button to select the VEXT option and then press

the 

→

button to select either 1 Field, 2 Field, 5 Field, 

10 Field, 30 Field, or 60 Field (these are the number of fields
recorded after one VEXT pulse).

Note:

Your update rate will be decreased with the same factor as
the number of fields selected.

SERIES REC

- The Series Recording mode is convenient, when

you record with two or more VCRs. If you have two VCRs in the
Series Recording mode, the second VCR will start to record
automatically at the end of the first VCR recording.

Notes:

Before Series Recording, refer to the connection diagram
on how to connect Series Record VCRs.

Make sure a tape is in the each VCR and the safety tab is
in place.

The SERIES recording is not available when the Timer
recording is in stand-by mode.

The SERIES and REPEAT options on the REC MODE
menu are not be set to the ON mode simultaneously.

10. Press the 

↓

button to choose the SERIES REC option and

press the 

→

button to choose ON/OFF for each VCR.

REPEAT

- This function is used to select how the recording tape

is used before starting a recording.  These are:

STOP AT EOT

: Tape stops when it reaches end of tape

in RECORD mode.

RE-REC EVEN IF ALARM

: Rewinds tape and enters

RECORD mode at beginning of tape even if there has
been alarm.

REWIND, STOP

: Rewinds tape and then enters STOP

mode.

STOP IF ALARM

: Rewinds tape and enters RECORD

mode at beginning of tape, if there has been an alarm
recording it enters the STOP mode at end of tape.

11. Press the 

↓

button to choose the REPEAT option and press

the 

→

button to choose the available options (see list above).

1-15

Record

(6H-960H mode)

Record

(6H, 18H, 30H

mode)

Record

(6H-960H mode)

Record

(6H, 18H, 30H

mode)

Real Time

Record

Alarm

Record

Real Time

Record

Alarm

Record

Record Start

Alarm signal

is input

Alarm record

duration is ended

Alarm signal

is input

RECORD MODE SET UP

< RECORD MODE SETUP >

ALARM  REC MODE 

A6H

ALARM  REC TIME 

30SEC

1SHOT  REC 

1SEC

VEXT OUT

1FIELD

SERIES  REC 

OFF

REPEAT:
STOP  AT  EOT.

[

↓     →

]

[END:MENU]