11
Specifi cations
Wireless
•
Frequency range : 2.403 to 2.479 GHz
•
RF output power
: 15 dBm
•
RF output impedance
: 50 ohm
Sound
•
Total Output Power
: 2 x 125W
(Home Theatre Mode)
•
Output power (FTC)
: 180W
Power
•
Power supply
: 110 – 240V AC,
50/60Hz
•
Standby power consumption: < 1 W
• Power
comsumption
:
50W
Connectivity
•
Rear Connections: Easy-Fit speaker
connectors
Dimensions
• Receiver
dimensions:
126 x 131.5 x 126 mm
(W x H x D)
• Transmitter
dimensions:
48.5 x 88.3 x 49 mm
(W x H x D)
•
Receiver Weight
: 1.19 kg
• Transmitter
Weight
:
0.08
kg
Troubleshooting
Problem
Solution
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking the system for
repair. If you are unable to remedy a problem by following these hints, consult
your dealer or Philips for help.
If the indicator on the
wireless transmitter blinks
continously for more than a
minute.
– The transmitter may have been swapped with
another transmitter supplied with other receiver.
– Turn off all connected devices.
– Turn on the connected home theatre system
– Press and hold the CONNECT button on the
transmitter for 5 seconds. Release the
CONNECT button.
– Turn on the wireless receiver.
rwss125_37_ENG.indd 11
rwss125_37_ENG.indd 11
2007-04-17 9:43:33 AM
2007-04-17 9:43:33 AM
