35
8
Once the recovery process is complete, click on the
Unplug or Eject Hardware
removal icon on your PC task tray. When you reach the message:
The 'USB
Mass Storage device' can now be safely removed from the system
, click
OK
.
•
For
Windows 98
users, there is no removal icon. Instead, please check your
RUSH shows the
READY
display, before you unplug RUSH.
9
Unplug and reconnect again. RUSH should now be able to resume operation.
TIP:
– To avoid this problem in future, please avoid unplugging RUSH during installation
and always use a fresh battery when connecting RUSH to your PC.
Malfunction. No reaction to controls and/ or display shows
–
Button lock activated.
Switch off
.
–
Electrostatic discharge.
•
Remove battery and replace after several seconds.
Sound skips during playback on RUSH
–
MP3 file made at compression level exceeding 320Kbps
•
Use a lower compression level to record your file into MP3 format.
USB does not connect/function
–
You are using an unsuitable USB cable
•
Use the supplied USB cable only.
–
Cable connections incorrect/ loose.
•
Check all connections are correct and well inserted on the RUSH player and
your computer.
–
USB driver not installed.
•
see page 10-13,
Software Installation
.
Troubleshooting