Learn a key
IIf you miss certain functions from your original remote control of the
RU760, the RU760 can learn these functions from the original remote.
You can store a fuction under any of the available keys of the RU760, except
LEARN, SELECT and SHIFT. Please, note that any function already stored
under a key will be deleted.
Example for VCR:
Make sure you have the original VCR remote control at hand.
1
Select the device mode VCR, with the
SELECT key.
2
Press the LEARN key and the target key on
the RU760
simultaneously for 5 seconds
,
until the VCR label blinks twice and remains
lit.
3
Place both remote controls on a flat surface
(like a coffee table) and aim them head-to-
head with about 10cm in between.
4
Press the button you want to copy on the original remote control.
–
If the RU760 has learned the code, the VCR label will blink twice to
confirm the signal is stored.
–
If the VCR light blinks once for a longer period, the IR signal is not
learned by the RU760. Please, try a few times and make sure the
remotes are aligned as described in step 3.
If the RU760 cannot learn the code after several times trying, it is possible
that:
–
The IR signal of your original device is out of range (the RU760 can
only learn IR signals with a carrier signal of 30-60kHz.
–
The memory of the RU760 is full.
–
The RU760 stopped the learning process after 20 seconds if no
IR signals are found. Check if your original remote control is working
correctly.
VCR
DVD
SA
T
AMP
CD
LEARN
SELECT
GUIDE
AU
DIO
CHAPTER
SUBTITLE
YS
T.MENU
10 cm.
VCR DVD SAT AMP CD
LEARN
SELECT
GUIDE
TITLE
AUDIO
CHAPTER SUBTITLE
DISC
SYST MENU
VCR DVD SAT AMP CD
LEARN
SELECT
GUIDE
TITLE
AUDIO
CHAPTER SUBTITLE
9
Instructions for use
English
RU760.qxd 04-06-2004 16:59 Pagina 9
