RU240- page 4
4
3
Immediately press
to stop the search.
If you missed the correct code because the search went too far, switch
the equipment back on, then press
(down) to send the previous
code again. Press
(down) repeatedly until the equipment switches
off again.
4
Once you've found the correct code, press
to lock it in memory.
The green LED blinks twice.
That's it!
Now, switch the equipment manually on again, then press a
few keys on the remote to check that the equipment responds correctly.
In the rare instance that it doesn't, try again from step 1 to find a better
code.
Note that code!
To save time if you ever need to setup again, make a
note of the correct code inside the battery case and in the back of this
booklet. In case you have forgotten to note the code you can still 'read
out' the code from the remote. Here's how:
1
Make sure you've selected the right mode (with
). Then press
and release
and
at the same time; the green LED lights up.
2
Press
. The green LED goes out.
3
Press
and count the number of times the green LED blinks. This
is the first digit of the 3-digit code. (No blinks means the digit is
zero.)
Press
and count the number of blinks for the second digit.
Press
and count the number of blinks for the third digit.
3
2
1
6
1
P
P
English
