Instructions for use
English
5
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in
the direction of the arrow.
2
Place two R03, UM4 or AAA type batteries
into the battery compartment, as shown.
3
Slide the cover back and click it firmly into
place.
Testing the remote control
The remote control has been programmed to operate the most-used
functions of almost any brand of TV. Because the RU510 may use different
signals for each make and even for different models of the same make, it is
advisable to test whether your TV responds to the RU510.
The example below instructs you how to do this.
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Check whether all the keys are working.
For an overview of the keys and their
functions see ‘3. Keys and functions’.
–
If the TV responds as it should to all of the
key commands the RU510 is ready for use.
•
If the TV does not respond at all or not to all of the
key commands, follow the instructions under
‘Setting the remote control’.
M
EN
U
OK
PROG
AV
PROG
VOL
VOL
XP SBC RU 510/87.3 06-02-2004 12:36 Pagina 5
