7
Remove the jar from the container and turn the control
knob to the left to the ‘
0
’ (OFF) position.
8
Stir the contents of the jar to distribute the heat.
9
Always check that the contents of the jar are at the correct
temperature by testing some on the back of your hand or via
your mouth.
10 If the temperature is much too low, fill the beaker again with
10ml.Turn the click-step control knob
4
to the right until
the indicator lamp lights up red to start the heating up again.
Note!
The ring ensures that the hot steam heats up the jar extremely
fast to the right temperature. Warming the jar without the ring,
might result in a wrong temperature, therefore never use the
bottle warmer without the ring.
Keeping warm
With the Baby Bottle Warmer you can also keep the bottles and
jars warm for a short time.
To do this set the control knob to the
symbol. Do not add
water.The thermostat ensures that the set temperature is
maintained. For microbiological and hygienic reasons baby food
should never be kept warm for longer than one hour.
Note!
Never hold the Baby Bottle Warmer in your hands when in use.
ENGLISH
7
SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 7
