Philips SDV7220/12, User Manual

8

EN

Mount on the wall

1 

Mount two wood screws into the wall with 

80mm (3.149") of center distance.

2 

Plug the plastic bracket into two notches 

on the rear housing, then push it up to 

lock in.

3 

Attach the plastic bracket to the wood 

screws on the wall.

4 

Slide the gain control switch of the 

amplifier towards the max. position.

a

b

a

b

14

Tip

•

It is possible to slide the gain control switch towards 

the min. position or remove the amplifier for best 

reception.

Set up a digital tuner with this 

antenna

You can install available channels with the digital 

TV tuner. This automatic process is part of the 

setup of the tuner. Ensure the antenna has 

set up properly before the tuner can receive 

viewable channels.
There are two ways to connect the antenna to 

the TV:
•  Connect the antenna to a digital tuner. 

If the signal strength is good enough, the 

channels can be memorized in the tuner 

automatically .

•  Connect the antenna directly to the TV. 

Tune to the analogue channels and find 

the best antenna location. Then re-connect 

the antenna to the digital tuner. Ensure the 

signal strength is good enough before you 

install the channels with the tuner.