44
EN
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press
MENU
.
2
Select
[ANSWER MACHINE]
>
[SETTINGS]
>
[RING DELAY]
, then
press
[SELECT]
to confirm.
3
Select a new setting, then press
[SELECT]
to confirm.
The setting is saved.
»
Note
Ensure that the answering machine is switched
•
on before this feature can be applied.
Tip
When you access the answering machine
•
remotely, you are recommended to set the
ring delay to
[ECONOMY]
mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
The remote access PIN code is the same as
•
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press
MENU
.
2
Select
[ANSWER MACHINE]
>
[SETTINGS]
>
[REMOTE ACCESS]
,
then press
[SELECT]
to confirm.
3
Select a new setting, then press
[SELECT]
to confirm.
The setting is saved.
»
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter
#
when you hear the outgoing
message.
3
Enter your PIN code.
You now have access to your
»
answering machine, and you can now
listen to the new messages.
Note
You have 2 chances to enter the correct PIN
•
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
