Version 5: September 2010
2
Important!
Please read this manual from cover to cover before attempting to install, operate or maintain the luminaires to which it
relates. It contains important installation, operating, maintenance and safety procedures which you, the customer must
strictly comply with.
Along with such procedures mentioned in this document, the customer should also observe such other procedures
generally applicable to lighting equipment.
Please follow the instructions in this manual. Selecon accepts no responsibility if the customer fails to do so.
For each customer, operating conditions will vary, sometimes greatly. Such variations may affect the luminaires‟
performance. Philips
Selecon has no control over the customer‟s unique operating environment. Hence, Philips Selecon
makes no representations or warranties concerning the luminaires‟ performance under the customer‟s actual operating
conditions. All operating parameters must be validated for each customer application by the customer‟s technical experts.
If the customer does not follow the installation, operating, maintenance and safety procedures in this manual, as well as
those generally applicable to lighting equipment, the luminaire may not perform as expected. More seriously, it may cause
property damage, personal injury or other losses.
Philips Selecon accepts no liability for direct, indirect, incidental, special, or consequential damages resulting from the
customer‟s failure to follow the installation, operating, maintenance and safety procedures in this manual or those
generally applicable to lighting equipment. The foregoing limitation extends to damages for personal injury, property
damage, loss of operations, loss of profits, loss of product or loss of time, whether incurred by the customer, the
customer‟s employees or a third party.
Philips Selecon used all due care in preparing this manual. However, Philips Selecon accepts no liability for errors or
omissions. Philips Selecon reserves the right to change the specifications of its luminaires, or the information in this
manual, without necessarily giving its customers notice thereof.
Installation, operation and maintenance are entirely at the customer‟s risk.
Philips Selecon luminaires should be installed, operated and maintained by suitably qualified personnel. Such personnel
should have previous experience with lighting equipment as well as general electrical experience.
This manual is intended to provide general guidance to such suitably qualified personnel. For specific guidance and
technical support, contact Philips Selecon or its authorised representative.
Information in this manual shall not be deemed a warranty, representation or guarantee concerning a luminaires‟ suitability
or fitness for a specific purpose.
Subject to the right to use its luminaires, Selecon does not convey any right, title or interest in its intellectual property,
including, without limitation, its patents, copyrights and know-how.
Safety Warnings:
Not for residential use.
CAUTION
– DANGER OF BURNS
- avoid contact by persons or materials.
This Acclaim luminaire will get very hot during use. Please take care when handling to avoid burns
–
we recommend the wearing of gloves for focusing when the luminaire is on.
SAFETY
-
Mains Power Isolation
: The Acclaim range is fitted with a micro-switch that automatically
disconnects the mains power when the lamp holder is removed. However, it is also recommended
that the luminaire always be electrically isolated from mains power before re-lamping, cleaning or
servicing.
CAUTION
: Risk of fire
–maximum wattage lamp: 650W.
This luminaire is not suitable for outdoor use. They are rated at IP00.
The luminaire should be at least 1.5m / 5ft away from the nearest object it is lighting.
= 90
o
The Acclaim range can be operated only through a range of angles 90
either side of horizontal.
