Philips SENSEO HD 7810/65, User Manual

 7 

 Press the 2-cup button 

qq

 and let the machine operate. Repeat this 

until the water reservoir is empty. 

Note: Make sure that you use up the descaling mixture completely during the 

descaling cycle.
Never interrupt the descaling cycle. 

 8 

 Exchange the 1-cup pod holder 

°

 for the 2-cup pod holder 

°°

. 

Place a used pod in the 2-cup pod holder 

°°

 and close the lid. 

 9 

 Repeat steps 3 to 7.

Never descale the coffee machine with the lid open. Make sure the lid is 

properly locked.

 10 

 Remove the used pod and clean both pod holders after descaling 

with hot water and a dishwashing brush to prevent the sieve in the 

center from getting clogged.

 11 

 Rinse the water reservoir with clean cold water. Fill the water 

reservoir up to the MAX indication with clean cold water and repeat 

steps 5 to 7.

Note: Do not refill the water reservoir with used hot water or the used 

descaling mixture.

 12 

 Rinse the water reservoir once again with clean cold water. Fill the 

water reservoir with clean cold water up to the MAX indication and 

repeat steps 5 to 7 once more.

Note: Always rinse the machine by letting it empty two full water reservoirs.

Frost-free storage

If the coffee machine has already been used and therefore has been 

flushed with water, it may only be used and stored in a frost-free place to 

prevent it from becoming damaged.

Assistance

For assistance, call 1-866-4 Senseo (1-866-473-6736) or visit our  

website at www.senseo.us.

Disposal

This product may contain lead and mercury. Disposal of these materials 

may be regulated due to environmental considerations. For disposal or 

recycling information, please contact your local authorities or visit  

www.recycle.philips.com.

ENGLISH

16