No sound/
Receiver unit power off
Switch on the POWER button of the
distorted sound
receiver unit. The POWER STATUS
light will be illuminated in red.
No battery installed
Follow step 1 to 4 of
‘Installing/replacing the batteries’
Wrong battery orientation
Reposition the batteries according to
the engraved polarity symbol.
No power supply to transmitter
Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
step 5 to 7.
Battery power running low
Follow step 8 to 12 to recharge the
receiver unit.
Audio source not connected
Make sure the audio output of your
audio source is connected to the
3.5 mm stereo LINE IN jack of your
transmitter.
Follow step 13 and 14.
Audio source is off
Turn on your audio source.
Volume level set too low
Adjust the volume level of your
audio source or the receiver unit.
Hearing Safety: Continuous use at a
high volume may permanently damage
your hearing.
Audio output level low
In case of audio sources with
adjustable output level, adjust the
output level to a higher and
non-distorted level.
IMPORTANT: In case of certain TVs,
the headphone jack output level can
only be adjusted after accessing the TV
on-screen menu.
Receiver unit not tuned to
Push and hold the AUTO-TUNING
the transmitter
button for about 1 sec, then the
receiver unit will automatically
search for the best possible
reception.
Interference from other
1) Alter the transmitter’s frequency
radio sources
channel. Select 1 of the 3 options for
best reception.We advise you to
select channel 1 as the first option.
Next adjust the receiver unit’s tuning
channel as described above.
2) Move transmitter or receiver unit
elsewhere
ENGLISH
12
SHC8680new.qxd 04-05-2005 10:24 Pagina 12
