18
1
Remove the battery compartment cover and insert
three AA (1.5 V) batteries, noting the + and – configura-
tion in the battery compartment.
2
Replace the cover.
3
Make sure the Media Center is connected to the mains.
4
Press the
y
STANDBY-ON
key (
1
) to switch on the
Media Center.
> The Standby/On indicator (on the STANDBY-ON key 1)
goes out.
5
Press the
CONNECT RF KEYBOARD
key (
17
) on
the Media Center.
6
Press the
key (
2
) on the keyboard.
> The Media Center is now able to receive commands from
the wireless keyboard.
Note:When not used for 5 minutes, the keyboard switches to
standby.You can activate the keyboard again by pressing
any key except the left and right mouse keys (1) and the
trackball (13).
Installing the wireless keyboard
3 x
