27
4
Additional connections
1
Connect headphones with a 3.5 mm jack to the
HEADPHONE
socket (
13
) on the front of the Media
Center.
2
Set the headphone volume with the
4
HEADPHONE VOLUME
3
keys (
12
).
•
You can mute the headphones sound with the
Mute
(
s
) key (
10
) on the remote control.
Connecting headphones
Video
ca
m
e
r
a
•
Connect the
Firewire
(IEEE1394 / i.LINK) connector
of your camera to the
FIREWIRE
(IEEE1394 / Firewire
/ i.LINK) connector (
16
) on the front of the Media
Center. For this use a 4-pin firewire (IEEE1394 / i.LINK)
cable (
not supplied
).
OR:
•
Connect the
USB
connector of your camera to the
USB 2.0
input (
15
) on the front of the Media Center.
For this use a USB 2.0 cable (
not supplied
).
Notes:
–
Be sure to connect the camera to the Media Center before
starting the
DV Capture
program.
–
Be sure to exit the
DV Capture
program before disconnec-
ting the camera.
–
Please check to see if additional software is required to sup-
port your device. Install the drivers that came with your devi-
ce before connecting the device to the Media Center. For
this, see the user manual of the device.
Connecting a video camera
(or other portable external source)
•
Connect a microphone to the
MIC
input (
14
) on the
front of the Media Center.
Connecting a microphone
