28
External HD
Inp
u
t
Exte
r
nal HD
•
Connect the
Firewire
(IEEE1394 / i.LINK) connector
of your external drive to the
FIREWIRE
(IEEE1394 /
i.LINK) connector (
11
) on the rear of the Media
Center. For this use a 6-pin firewire (IEEE1394 / i.LINK)
cable (
not supplied
).
OR:
•
Connect the
USB
connector of your external drive to
the
USB 2.0
connector (
13
) on the rear of the Media
Center. For this use a USB 2.0 cable (
not supplied
).
Note: Please check to see if additional software is required to
support your device. Install the drivers that came with your
device before connecting the device to the Media Center.
For this, see the user manual of the device.
Connecting an external drive
(HDD, optical drive)
Po
r
table
Media
Playe
r
•
Connect the
Firewire
(IEEE1394 / i.LINK) connector
of your portable media player (e.g. an MP3 player, Hard
Disk Drive or photo camera) to the
FIREWIRE
(IEEE1394 / i.LINK) connector (
11
) on the front of the
Media Center. For this use a 4-pin firewire (IEEE1394 /
i.LINK) cable (
not supplied
).
OR:
•
Connect the
USB
connector of your portable media
player (e.g. an MP3 player, Hard Disk Drive or photo
camera) to the
USB 2.0
input (
13
) on the front of the
Media Center. For this use a USB 2.0 cable (
not
supplied
).
Note: Please check to see if additional software is required to
support your device. Install the drivers that came with your
device before connecting the device to the Media Center.
For this, see the user manual of the device.
Connecting a portable media player
(or HDD or photo camera)