Tuner mode
You can also use your video recorder as a TV receiver (tuner).
1
Hold the
STOP
h
button, until
+
appears in the display.
2
Select the required programme number with the
P
r
or
P
q
button or with the
0-9
buttons.
3
Switch the video recorder to standby by pressing the
STANDBY
m
button when you no longer want to watch
television.
Externally controlled recording
Do you have another device, e.g. a satellite receiver, which
can control other equipment by a ’programming’ function? You
can connect this device to the video recorder with a scart
cable, at socket
EXT.2
.
1
Insert a cassette. Switch to standby with the
STANDBY
m
button.
2
Hold the
MONITOR
button until ’REC.P’ appears in the
display.
3
If you want to interrupt this function
before
the recording
has actually started, hold the
MONITOR
button until
’REC.P’ disappears from the video recorder display.
4
If you want to interrupt this function
while
a recording is
being made, press the
STANDBY
m
button.
On Screen Display (OSD)
You can switch the On Screen Display (OSD) on or off.
1
Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorder.
2
With the
P
q
or
P
r
button, select ’OSD’. Confirm with
the
OK
button.
3
With the
P
q
button, select ’ON’ or ’OFF’. Confirm with
the
OK
button.
Note:
With the
OK
button you can superimpose the actual
operating mode on the TV screen.
Channel number or frequency display
You can switch between the display for ’channel number’ or
’frequency’ for manual channel search.
1
Press the
AUTOINSTALL
button.
2
With the
P
q
or
P
r
button, select
’CHANNEL/FREQUENCY’. Confirm with the
OK
button.
3
With the
P
q
button. select ’CHANNEL’ or ’FREQUENCY’.
Confirm with the
OK
button.
Manual channel search
In certain cases the ’Automatic channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the TV channels.
1
Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorder.
2
With the
P
q
ot
P
r
button, select ’MANUAL SEARCH’.
Confirm with the
OK
button.
3
Hold the
P
q
button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen.
4
Confirm with the
OK
button.
5
With the
P
q
or
P
r
button or the digit buttons
0-9
,
select the programme number that you wish to give to this
TV channel (e.g.: ’P 01’).
6
Confirm with the
OK
button.
If you want to allocate more TV channels, repeat steps
3
to
6
until all TV channels have been stored.
7
To end, press the
STANDBY
m
button.
Note:
Channel number or frequency can also be entered
directly at step
3
, using the
0-9
buttons.
*
Allocating a decoder:
If you want to allocate a decoder,
press the
INDEX
E
button at step
3
until ’DEC’ appears in
the display.
4.
SPECIAL FEATURES
12