BDL4250EL / BDL4650EL
5
2. Parts and Functions
2.1. Control Panel
1
2
3
4
5
6
7
8
MUTE INPUT
MENU
9
1
POWER button
Use this button to turn the display on or put the display to standby.
2
MUTE button
Switch the audio mute ON/OFF.
3
INPUT button
• Use this button to select the input source.
4
[ ] button
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
• Used as [
SET
] button in the On-Screen-Display menu,
5
[ ] button
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
6
[ ] button
Move the highlight bar up to adjust the selected item while OSD
menu is on.
7
[ ] button
Move the highlight bar down to adjust the selected item while OSD
menu is on.
8
MENU button
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
NOTE: “Keyboard Control Lock Mode”
This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both ]
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
9
Remote control sensor and power status indicator
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
-
Lights green when the display is turned on
-
Lights red when the display is in standby mode
-
Lights amber when the display enters APM mode
-
When {
SCHEDULE
} is enabled, the light blinks green and red
-
If the light blinks red, it indicates that a failure has been
detected
-
Lights off when the main power of the display is turned off
