BDL4250EL / BDL4650EL
19
Network settings
Assign {
IP address
}, {
Subnet Mask
}, and {
Default gateway
} for the
display.
Network settings
Network host name
DHCP
IP address
Subnet mask
Default gateway
Login user name
Login password
9
172
255
0
0
0
-
-
-
a d m i n
0
[ SET ]
change [SET] in STORE
Z
Disable
16
255
0
0
L
-
-
-
0
0
0
0
1
0
0
-
-
-
• DHCP - Choose to enable or disable the DHCP function. If enabled,
the display will be assigned IP address, Subnet mask and Default
gateway automatically. If disabled, you will be prompted to enter
the following values manually. When finished, press [
SET
] button to
store and save the chosen values.
• IP address
• Subnet mask
• Default gateway
• Login user name (The default user name is {
admin
})
• Login password (The default password is {
0000
})
Configuration reset
Reset all settings in
Configuration1
menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {
Picture
}, {
Screen
}, {
Audio
}, {
PIP
},
{
Configuration1
}, {
Configuration2
}, and {
Advanced option
} to the
factory preset values.
Press [ ] or [ ] button to select [
Reset
], and then press [
SET
] button
to do the reset.
Factory reset
Cancel
Reset
4.2.6. Configuration2 menu
OSD turn off
Information OSD
Off timer
OSD H-position
Monitor information
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
OSD V-position
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {
5 ~ 120
} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {
Off
} selection.
The options are: {
1 ~ 60
} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {
Off
,
1 ~ 24
} hours from currrent time.
NOTE: When the “Off timer” is activated, the “Schedule” settings will
be disabled.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information
Model name:
Serial no:
Operation hours:
SW Version:
BDL4650EL
VER 0.204
0 H 3M
4.2.7. Advanced option menu
Input resolution
HDMI clock threshold
Black level expansion
Gamma selection
Scan conversion
Film mode
IR control
Keyboard control
Tiling
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
Scan mode
Heat status
Input resolution
Set the resolution of the VGA input. This is only required when the
display is unable to detect the VGA input resolution correctly.
NOTE: This item is functional for
VGA
input only.
The options are:
• {
1024x768
/
1280x768
/
1360x768 / 1366x768
}
• {
1400x1050
/
1680x1050
}
• {
1600x1200
/
1920x1200
}
