BDL4677XH
24
DDC/CI
Choose to turn on or off the DDC/CI communication function. Select
{
On
} for normal use.
DDC/CI (Command Interface) specifies a means for a computer to
send commands to the monitor, as well as receive sensor data from the
monitor, over the bidirectional link such as DDC2Ab/Bi/B+.
Specific commands to control monitors are defined in a separate
Monitor Control Command Set (MCCS) standard.
DDC/CI monitors are sometimes supplied with an external color
sensor to allow automatic calibration of the monitor’s color balance.
Some tilting DDC/CI monitors support an auto pivot function, where
a rotation sensor in the monitor enables the operating system to keep
the display upright as the monitor is moved between its portrait and
landscape positions.
The following DDC/CI commands should be supported via command
line:
No.
Commands
1
Set Brightness
2
set Contrast
3
Set Red Gain
4
Set Green Gain
5
Set Blue Gain
6
Get Brightness
7
Get Contrast
8
Get Red Gain
9
Get Green Gain
10
Get Blue
HDMI with One Wire
CEC control.
• {Off}
- Disable CEC.(Default)
• {On}
- Enable CEC.
Smart power
Set the display to reduce the power consumption automatically.
The options are: {
Off
} / {
Medium
} / {
High
}.
Auto signal detection
Choose to let the display detect and display available signal sources
automatically.
• {
Off
} - Once a signal is connected, it can only be selected manually.
No signal, set the display to display the image automatically according to
the search order of each option.
The options are:
{All}
/
{PC source only}
/
{Video source only}
/
{Failover}
• {All}
- Search order: DP -> DVI-> VGA -> HDMI -> Component->
Video -> Card OPS
• {PC source only}
- Search order: DP -> DVI -> VGA -> HDMI ->
Card OPS
• {Video source only}
- Search order: HDMI -> Component ->
Video
• {
Failover
}
-
Failover 1: User-defined setting. Default:HDMI.
-
Failover 2: User-defined setting. Default:HDMI.
-
Failover 3: User-defined setting. Default:HDMI.
-
Failover 4: User-defined setting. Default:HDMI.
-
Failover 5: User-defined setting. Default:HDMI.
-
Failover 6: User-defined setting. Default:HDMI.
-
Failover 7: User-defined setting. Default:HDMI.
APM (Advanced Power Management)
Power save setting.
• {Off}
- No signal, direct shutdown. ( Default )
• {On}
- No signal, enter into Power Save mode.
OPS settings
Set the OPS configuration under each power condition.
• {
Auto
} - After selecting {
Card OPS
} for video source input, the
OPS will be set to off when the display power is set to off, or set to
on when the display power is set to on. When set to other video
source inputs, the OPS will always be set to on.
• {
Always off
} - The OPS will always be set to off.
• {
Always on
} - The OPS will always be set to on.
Advanced option reset
Reset all settings in the
Advanced option
menu to factory preset values.
1. Press [
SET
] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {
Reset
} and press the [
SET
]
button to restore settings to factory preset values.
3. Press the [
EXIT
] button or select {
Cancel
} and press the [
SET
]
button to cancel and then return to the previous menu.
Schecule
Monitor ID
DDC/CI
Smart power
Off
Off
On
Action
Action
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
HDMI with One Wire
Auto signal detection
Action
Action
Advanced option reset
OPS settings
Always on
APM
Off
Date and time
Action
