55BDL3102H
5
2. Parts and Functions
2.1. Control Panel
1
2
3
4 5
6 7
8
9
1
Use this button to turn the display on or put the display to standby.
2
Switch the audio mute ON/OFF.
3
Choose the input source.
• Used as [
] button in the On-Screen-Display menu.
4
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
5
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
6
Move the highlight bar up to adjust the selected item while OSD
menu is on.
7
Move the highlight bar down to adjust the selected item while OSD
menu is on.
8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
9
Remote control sensor and power status indicator
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
-
Lights green when the display is turned on
-
Lights red when the display is in standby mode
-
Lights amber when the display enters APM mode
-
When {
SCHEDULE
} is enabled, the light blinks green and red
-
If the light blinks red, it indicates that a failure has been
detected
-
Lights off when the main power of the display is turned off
