55BDL3102H
13
3.4. Connecting Multiple Displays in a Daisy-chain Configuration
You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board.
3.4.1. Display control connection
Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2.
DISPLAY 1
DISPLAY 2
PC
[RS-232C IN]
[RS-232C]
[RS-232C OUT]
[RS-232C IN]
3.4.2. Digital video connection
Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2.
PC
[DP IN]
[DP]
[DP OUT]
[DP IN]
DISPLAY 1
DISPLAY 2
3.5. IR connection
FORMAT
SOURCE
INFO
LIST
OPTIONS
ADJUST
VOL
NORMAL
ID
ID SET
ENTER
DISPLAY 1
DISPLAY 2
[IR IN]
[IR OUT]
[IR IN]
External
IR Receiver
NOTE:
1. This display’s remote control sensor will stop working if the [
IR IN
] is connected.
2. IR loop through connection can support up to 9 displays.