55BDL3102H
29
RC lock: Choose to enable or disable the button function of the remote
control.
Monitor Group: Adjust the group range between 1 to 255. The default
setting is 1
Monitor ID: Adjust the ID number for controlling the display via the
RS232 connection. Each display must have a ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255. The Default setting is 1.
K. Click on Network Setting to switch to Network Setting Page.
Host Name: In the multiple-display connection, you can rename each
display for easy identification.
DHCP: Choose how this display should assign address to the network
resource. (On: DHCP & Auto IP, Off: Static IP). If DHCP is set to On,
device will request and be assigned an address every time it’s booted
up. Otherwise, you need to ask your network administrator for the
appropriate IP settings.
L. Click on System information to switch to System information Page.
Getting the display information. Such as Serial number, running time and
Temperature via the RS232/Network.
Note:
1. Some browser issues may be caused by the browser itself. For optimal
viewing and security we recommend that you keep your browser up to
date.
2. We recommend that you use IE for optimal performance with Web
Control.
5.1.9. FTP Server
A. Ensure you have connected to the network. You can press INFO
button to display the connection of the network.
Picture format
Picture style
Sound style
Smart power
Volume
Monitor group
Monitor ID
Model name
SW Version
Serial no
Temperature
Network configuration
IP address
Netmask
Gateway
Network name
Ethernet MAC address
Wide screen
Standard
Personal
Off
0
1
1
55BDL3102H
1.51
25°C
DHCP & Auto IP
192.168.1.116
255.255.255.0
192.168.1.1
55BDL3102H
FF:FF:FF:FF:FF:FF
HDMI 1 1080p60 14/05/2018 Monday 16:10:14
B. Open Internet Explorer and enter the address of the FTP site in the
address bar.
C. Input the username and password for the account you wish to
connect to and click
Log On
.
