BDL5588XC
24
• {
V
Zoom
}: Expands the vertical size of the image only.
Note
: Zoom, H Zoom and V Zoom are functional only when the
Picture format setting is set to Custom Zoom.
See page 19 for the descriptions about
Picture format
.
HDMI input range
HDMI video format color ranges
• {
Auto
}: Automatically HDMI video format color ranges.
• {
Limit
}: Chose HDMI video format Limit range.
• {
Full
}: Chose HDMI video format Full range.
Picture reset
Reset all your picture settings to the factory defaults.
5.1.2. Sound
Sound style
Bass
Treble
Balance
Volume
Minimum volume
Maximum volume
Surround mode
Audio out (line out)
Advanced
Sync. Volume
Sound reset
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Sound style
Access predefined sound settings.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Volume
Adjust to increase or decrease the volume.
Minimum volume
Set the Minimum volume.
Maximum volume
Set the Maximum volume.
Surround mode
Set surround effects for audio performance.
Audio out (line out)
Adjust audio output volume.
Advanced
Access advanced settings to enhance your audio experience.
• {
Auto volume leveling
}: Enable the reduction of sudden volume
changes.
• {
Speaker settings
}: Turn on or off the internal speakers.
• {
Clear sound
}: Enhance sound quality.
• {
Audio out format
}: Choose the type of audio output through
the digital audio output connector. (HDMI only)
• {
Audio out delay
}: Automatically sync the image on this display
to the audio from a connected home theatre.
• {
Audio out offset
}: Adjust the setting for audio output delay.
Available if {
Audio out delay
} is switched on.
Sync. Volume
Choose to {On} or {Off} the Sync. Volume function. Set {On} to
synchronize the volume of internal speaker and line-out. Set {Off} to
adjust the volume of internal speaker and line-out, respectively.
Sound reset
Reset to default setting.
Card OPS audio
Choose to set OPS audio output format.
The options are: {
Auto
}, {
Analog
}, {
Digital
}
NOTE: When the user select Card OPS source, this item will be
appear in OSD menu.
5.1.3. Tiling
Enable
H monitors
V monitors
Position
Frame comp.
Frame comp. H
Frame comp. V
Switch on delay
RS232-Routing
Auto ID
Picture
Sound
Tiling
Network
General settings
Advanced
Help
With this function you can create a single large-screen matrix (video
wall) that consists of up to 100 sets of this display (
up to 10-sets on the
vertical and 10-sets on the horizontal sides
).
Enable
Choose to {
On
} or {
Off
} the Tiling function. If {
On
}, the display will
apply the settings in {
H monitors
}, {
V monitors
}, {
Position
}, and
{
Frame comp.
}.
H monitors
Adjust displays on the horizontal side.
V monitors
Adjust displays on the vertical side.
Position
Adjust the position of this display in the screen matrix.
