Philips Sonicare EssentialClean, Instructions Manual

Note: If you press the power on/off & mode button 

after you started the brushing cycle, the toothbrush will 

pause. After a pause of 30 seconds, the Smartimer resets.
Easy-start

The Easy-start feature gently increases power over the 

first 14 brushings to ease into the Sonicare experience.

Note: This Sonicare model comes with the 

Easy-start feature deactivated.
To activate the Easy-start feature:

 1 

 Attach your brush head to the handle.

 2 

 Place the handle in the plugged-in charger.

 3 

  Press and hold the power on/off & mode 

button for 2 seconds. Your Sonicare beeps 

twice and the battery level indicator flashes 

green to indicate that the Easy-start feature 

has been activated.

To deactivate Easy-start: Press and hold the power on/

off & mode button for 2 seconds. You hear 1 beep and 

the battery level indicator flashes yellow to indicate 

that the Easy-start feature has been deactivated.

Note: Each of the first 14 brushings must be at least  

1 minute in length to properly move through the  

Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial 

ramp-up period is not recommended and reduces 

Sonicare’s effectiveness in removing plaque.

ENGLISH

10