SpaceWise for Office Applications
v. 3.7
29
Philips Lighting North America
b.
Point remote to
any
luminaire and press
“Open,” once.
Wait for the luminaire to dim
down to 5%.
Make sure the button is pressed only once. Pushing multiple times can
create multiple networks which can cause undesired operation.
c.
Select the correct wireless channel by
pressing and holding one of the 4
buttons for at least 10 seconds and then
release the button.
If the switch joins the group then
the luminaire will FLASH twice
and group light level will go to
5%.
Step “c” is a trial and error process. The 4 buttons signify 4 different wireless
channels. To join the scene selector to the luminaire group the wireless
channel of the scene selector and the luminaire must match. Since the
wireless channel of the luminaire is not visible, one has to try out all the 4
channels via the buttons to determine the matching channel as described in
step “d.”
d.
If the scene selector did not join the
group as per step “c” then repeat step
“c” but with a different button (1) this
time. If scene selector has joined the
group then go to step “e.”
If the scene selector joins the
group then the luminaire will
FLASH twice and group light level
will go to 5%.
OR
