SpaceWise for Office Applications
v. 3.7
38
Philips Lighting North America
To alter the light levels of another zone execute steps “a” and “b” again
on the new zone.
c.
After all the zones have been adjusted to
the required light levels press “scene,”
once.
While the LED is still blinking red, enter
the scene number to be stored.
Select number “
2
” to store the scene on
the “
.
” (bottom left) button on the scene
selector.
Select number “
3
” to store the scene on
the “
. .
” (bottom right) button on the
scene selector.
Red LED on remote will start
blinking.
Red LED on remote will stop
blinking.
d.
Point to
any
of the luminaires in the
group and press “save.”
The luminaire will FLASH twice.
e.
Test the scene selector by pressing “
.
”
and/or “
. .
” buttons.
All the luminaires in the group
will react to the button action.