Philips SpeechMike LFH3500, User Manual

13

User manual

5.3  Configure the bar-code scanner 

(LFH3600 only)

The SpeechMike barcode scanner is pre-
configured with the keyboard language US 
English and the suffix “carriage return” (CR). 
Before using the barcode scanner for the first 
time, it is necessary to adapt it to your local 
keyboard language. To change the scanner 
configuration, start the application 

Barcodeconfig.

exe

 on the installation CD.

For information about customizing the barcode 
module, refer to the Advanced Barcode Scanner 
Configuration manual on the installation CD 
provided with your SpeechMike.

indicator light flashes to activate and deactivate 
the automatic muting of the microphone using 
the motion sensor.

5.2  Update the firmware

Your SpeechMike is controlled by an internal 
program called firmware. Newer versions of the 
firmware may have been released after you have 
purchased the SpeechMike.

1 

Download the firmware update for your 
SpeechMike model from www.philips.com/
dictation.

2 

The dictation microphone must be 
connected to the computer with the USB 
cable.

3 

If the option to start the

 Device Control 

Center

 automatically was selected during 

installation, open the program by clicking 
the   icon in the notification area of the 
Windows task bar. To manually start the 
program, open the Windows start menu in 
Windows and select 

All Programs > Philips 

Speech Control > Philips Device Control 
Center

.

4 

On the 

Device

 tab, click on 

Firmware 

update

.

5 

Click the 

Import

 button and select the 

folder with the firmware files to be 
imported.

6 

Click the 

Upgrade 

button to install the new 

firmware.

•  The firmware upgrade takes about 30 

seconds.

•  During firmware upgrade the indicator lights 

of the SpeechMike will be flashing.

B

 Warning

Do not disconnect the dictation microphone 
from the computer during firmware upgrade. 
This might damage your product.

ENGLISH