6
Programming Your Remote
Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There
are two different methods you can use to
program the remote,
Direct Code Entry
or
Auto Code Search.
• The
Direct Code Entry
method is the
recommended method as it is the simplest
and quickest method in most cases.
• The
Auto Code Search
method searches
through all the codes in the remote to find
a code for your device.
NOTE:
This remote comes preprogrammed for
Roku
®
boxes and Samsung TVs. Press
TV
for
Samsung TVs and
STR
for Roku boxes.
Direct Code Entry (Recommended)
1. Locate the
Code List
included
with your remote. Find the
section for the type of device you
wish to control, (for example
TV,
STR, AUD, DVD, CBL, AUX
). Locate
the brand of your device and
circle all the remote codes for the
brand.
2. Press and hold down the
SETUP
button on the remote until the
red light on the remote control
turns on. Release the
SETUP
button. The red light will
remain
on.
NOTE:
The red light will either be a
small light at the top of the remote
or the power ON/OFF button.
3. Press and release the device
button on the remote for the type
of device you wish to control, (for
example
TV, STR, AUD, DVD, CBL,
AUX
). The red light will blink once
and remain on.
NOTE:
Any of the device buttons
on the remote can be programmed
to control any of your devices.
For example, you can use the aux
device button on the remote to
