7
6
Sleep Timer
The SLEEP button operates the Sleep function of your
device providing it supports the Sleep function.
Alternatively, you can enable the remote to turn off
your TV after a period of 1 to 99 minutes as shown
below. This feature works even if your TV does not
have its own Sleep function.
1. Press and hold the
CODE SEARCH
button until the
red indicator stays on. Release the
CODE SEARCH
button.
2. Press and release the
SLEEP
button (Note any
previously set Sleep timer is canceled at this point
and the remote returns to normal operation).
3. Press and release the numeric buttons (
01-99
) for
the time required. The red indicator blinks off to
indicate button press acceptance and remains off
after the second button press.
4. TV Sleep Timer now set.
5. Leave the Remote pointing towards the TV with an
unobstructed path.
To cancel the Sleep Timer, press and release the
POWER
button or repeat Steps 1 and 2 above.
Code Identification Feature
Programming with Code Search
After the batteries are installed and you have
programmed the remote for the codes that operate your
TV, you can use your remote to operate your TV.
Product Operation
To Operate:
1. Aim the remote at the TV.
2. Press
POWER
to turn on the TV.
3. Press other buttons to operate the
features of your TV.
If your TV does not respond after you have tried all the
codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
1. Manually turn on the TV to be controlled.
2. Press and hold the
CODE SEARCH
button until the
red indicator stays on, then release the
CODE
SEARCH
button.
3. Press the
CHANNEL UP
button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the
CHANNEL DOWN
button
to backtrack through the library until the device
changes channel. Pressing
CHANNEL UP
changes
direction to forward again.
4. Press and release
MUTE
to install the code.
Note
: Code Search starts from the currently stored 4
digit number.
The Code Identification Feature allows you to identify
the 4 digit library code stored under your device key. For
example, if you want to find out what 4 digit code is
stored under your TV device key, follow the five steps
below:
1. Press and hold the
CODE SEARCH
button until the
red indicator stays on, then release the
CODE
SEARCH
button.
The red indicator blinks, then stays lit.
2. Press and release the
CODE SEARCH
button again.
The indicator light blinks off.
3. To find the first digit for the code stored, press each
numeric key from
0-9
in turn. When the indicator
light blinks off the number you pressed is the first
digit for the code you are searching for.
4. To find the second digit, repeat step 3, this time
when the indicator light blinks off this is the second
digit.
5. Repeat step 3 to find the third and fourth digits.
