18
configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of the
(see ‘Rear view’ on page
the Ethernet jack of the wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Follow the steps in chapter First-time
connection to home network (see ‘First-
time connection to home network’ on
page
) until the NP2500 shows the
prompt for the network setup.
4
Select
[Wired (Ethernet)]
to start the
network setup process.
The NP2500 tries to acquire an
automatic IP address.
Press
BACK
to enter your IP
address manually.
5
Enter your static IP address and confirm.
The NP2500 shows the confirmation
for the connection to the network.
The NP2500 shows the prompt for
the connection to the Internet.
6
Select
[Yes]
to connect to the Internet.
The NP2500 shows the confirmation
for the connection to the Internet.
»
»
»
»
»
EN
