Once a WAS7000 Station is added into
the Wi-Fi wireless network, the Wi-Fi
wireless connection of this WAS7000 to
the WAC7000 will be shut down.
However WAC7000 may still maintain
its Wi-Fi ad-hoc connection with other
WAS7000 stations.
– WACS7000 cannot shadow the IP of
the network device that is not
activated. Please be careful of the IP
address setting to avoid IP address
conflict between the wired and Wi-Fi
ports.
11.5 Viewing connection status
11.5.1 Viewing Station status on the
Center’s Wi-Fi network
1
Check that the Center is in HD source
2
Select Station Status
a.
Press
MENU
to enter the menu screen
b.
Press the navigation controls
3
or
4
and
2
to
enter Station Mgnt menu
c.
Press
3
or
4
and
2
to select Station Status
➜
A list of connected Stations or previously
connected Stations is displayed on the Center.
3
Press
2
to view the connection information.
1he
connection with
11.5.2 Viewing the connection with
external network
1
Check that the Center or Station is in HD
sourceCheck that the Center or Station is in HD
source
2
Select Information on the Center or Station
a.
Press
MENU
to enter the menu screen
b.
Press the navigation controls
3
or
4
and
2
to
enter Information menu.
➜
The display shows: System, Wi-Fi and Ethernet
3
Press the navigation controls
3
or
4
and
2
to
select Wi-Fi or Ethernet
➜
The display shows:
In Wi-Fi: information about the Wi-Fi settings on
the set.
In Ethernet: information about the Ethernet
settings on the set.
56
English
11. Network setting
pg001-pg068_WACS7000_Eng 2007.2.3 11:06 AM Page 56
Summary of Contents for Streamium WACS7000
Page 2: ...2 English ...
