B
DISASSEMBLY INSTRUCTIONS
2-1
Dismantling the Grille Assembly & Speaker Driver
1. Place the Subwoofer Box as shown in the Picture 1
and use a screw driver to force open the Grille Assembly.
Caution: Take care the surface when take out the
Grille Assembly of Subwoofer
2. Place the Subwoofer Box as shown in the Picture 2
and loosen 4 screws A to remove the Speaker Driver.
Dismantling the Front Assembly
1. Place the Subwoofer Box as shown in the Picture 3
(Bottom view) and use a screw driver to force open the
front assembly.
Dismantling the Rear assembly
1. Loosen 9 screws B as shown in the Picture 4 (Rear
View) to pull out the Printed Circuit Board assembly.
Caution: Do not break the bundle of wires to the front.
Take care the surface when take out the front
panel of subwoofer
Caution: Do not break the bundle of wires to the front.
Picture 1
Picture 2
Picture 4
Picture 3
WARNING: THERE IS ONLY A LED
BETWEEN FRONT PANEL AND
WOOD BOX. IF NOT NECCESSARY,
PLEASE DO NOT TRY TO OPEN THE
FRONT PANEL!!!
A
Summary of Contents for SW7000SA/00S
Page 6: ...2 2 SERVICE POSITION ...
Page 7: ...3 1 3 1 BLOCK DIAGRAM ...
Page 8: ...3 2 3 2 WIRING DIAGRAM ...