10
Note
AUDIO L connection cable is often indicated
•
by a white color on the connector and AUDIO
R connection cable is indicated by a red color
on the connector.
3
Connect the power adaptor to the
transmitter
Connect one end of the power adapter
•
(included) to the DC IN connector of
the SWW1800 transmitter. Connect
the other end of the power adaptor to a
mains socket.
The power LED indicator lights up in
»
solid blue.
The HDMI devices and analog devices with the
component and stereo RCA start connecting.
Connect the receiver to the
HDTV set
1
Connect the receiver with an additional
HDMI cable (not included):
Connect one end of the HDMI cable
•
to the receiver.
Connect the other end to the HDMI
•
OUT connector of your HDTV.
2
Connect the power adaptor to the
receiver:
Connect one end of the power
•
adapter (included) to the DC IN
connector of the receiver.
Connect the other end of the power
•
adaptor to a power socket.
DC IN 5V
HDMI OUT
HDMI OUT
1
2
3 Installation
Connect the transmitter to
your HD devices
You can connect 4 video sources to the
transmitter at the same time: two with
the HDMI connection and two with the
component connection, but only one source
can be selected and played.
1
Connect video source to the transmitter
using the HDMI cable.
Connect one end of the HDMI cable
•
(included) to the HDMI connector of the
transmitter.
2
Connect the video source to the
transmitter using the component cables
Connect one end of the RCA (green,
•
blue and red) cables to the Y/Pb/Pr IN
connectors of the transmitter. Connect
the other end of the RCA cables to the
corresponding Y/Pb/Pr OUT connectors
of your HD devices.
Connect one end of the set of audio
•
cables to the AUDIO L/R IN connectors
of the transmitter. Connect the other end
to the corresponding AUDIO L/R OUT
connectors of your HD devices.
DC 5V
EN
