background image

15

Note

After you press 

 

, it takes around 15 seconds 

before you see the LED indicator become solid 

blue and that the HDTV and HD device are 

activated.

Tip

To switch on the HDTV, you can also press 

 

the HDMI source button of your HDTV 

remote control (if available). Then select the 

HD device on the screen and press  . For 

more information, see the user manual of your 

HDTV.

Note

One-touch play feature does not apply in sleep 

 

mode. 

LED indicator status in standby mode

Mode

Status of the transmitter 

and receiver

Standby (Listen 

mode)

Solid purple

Standby (Sleep mode)

Solid red

On mode

Solid blue

To enter the listen mode, press 

 on the 

remote control of your HDTV/projector to 

switch it off.

The HDTV/projector and the HD 

 

»

device are in standby mode.
The LED indicators of the transmitter 

 

»

and receiver become solid purple.

Note

The power consumption in the listen mode 

 

is higher than the power consumption in the 

sleep mode.

If you need to switch your transmitter from 

listen mode to sleep mode for power saving, 

Press and hold 

• 

 on the remote control 

of the transmitter .

The HDTV/projector enters the sleep 

 

»

mode.
The LED indicators of the transmitter 

 

»

and receiver become solid red.

If your HDTV and HD device are not CEC 

compliant:

1

  press   on the remote control of the 

transmitter.

The LED indicators of the transmitter 

 

»

and receiver become solid red.

Use one-touch play in listen mode

One-touch play function enables you to press 

only one button to activate your HDTV/

projector and your HD devices in standby 

mode.

Ensure the HDTV and HD device are in 

• 

standby mode.
Ensure the transmitter is in listen mode.

• 

Press 

• 

 on the remote control of your 

HD device to switch it on.

The LED indicators of the transmitter 

 

»

and receiver flash and then become 

solid blue.
The HDTV is on and the HD device is 

 

»

activated automatically.

English

EN

Summary of Contents for SWW1800/27

























Reviews: